• Your shopping cart is empty!

Parts

Filter spare parts

Product Compare (0)
84-2-1

84-2-1

The material is transparent plastic, consisting of 2 pieces: lid, sealing ring, bucket, size: width 230mm, height 305mm, color: transparent...

14.00€ Ex Tax: 14.00€
84-2-11

84-2-11

The material is plastic, 4 points to 2 points elbow, used to connect the water purifier outlet, the elbow is used in a leisurely space, usually the water pipe is easy to leak when bending, specifications: 4 turns 2 points interface...

1.30€ Ex Tax: 1.30€
84-2-12

84-2-12

The material is plastic, 2 points diameter of the 3-pronged joint, one is directly inserted into the 2-point head, eliminating the need for a pipe, and the other 2 joints can be connected to the kitchen or living room, specifications: 2 points interface...

0.80€ Ex Tax: 0.80€
84-2-13

84-2-13

The material is plastic, 2 points of elbows, change the direction, usually in the outlet of the water outlet to connect 2 elbows in a row, you can turn 180 degrees, specifications: 2 points of interface...

0.70€ Ex Tax: 0.70€
84-2-14

84-2-14

The material is plastic, 2 points of diameter of 3-pronged joints, add 1 water place, one water diversion, and the other 2 joints can be connected to the kitchen or living room, specifications: 2 points of interface...

1.00€ Ex Tax: 1.00€
84-2-15

84-2-15

The material is a reverse osmosis membrane, which is used in the filtration of pure water, which can filter 97% of the salt of seawater, can be loaded into the limit of transparent shell, with a life of 18 months, specification: 100G...

10.50€ Ex Tax: 10.50€
84-2-16

84-2-16

The material is copper, which is used in the existing water pipe, loosen the original water pipe interface, and add this joint to the middle, which is the least cost, and then connect the 2-point interface with the filter, and the water will begin to be filtered, specification: 4 points to 2 points valve...

5.00€ Ex Tax: 5.00€
84-2-17

84-2-17

The material is plastic fiber, used in a 10-inch filter, usually the life depends on how much sediment is filtered, as long as you see the white fiber turn brown to replace, even if you don't change it, there will be a rust smell, specification: 100g...

1.90€ Ex Tax: 1.90€
84-2-18

84-2-18

The material is plastic fiber, used in a 10-inch filter, usually the life depends on how much sediment is filtered, as long as you see the white fiber turn brown to replace, even if you don't change it, there will be a rust smell, specification: 120g...

2.20€ Ex Tax: 2.20€
84-2-19

84-2-19

The material is plastic, and the bracket used to support the reverse osmosis filter is 57.6mm in diameter, 64.5mm in width, and 62.6mm in height...

1.00€ Ex Tax: 1.00€
84-2-2

84-2-2

The material is clear plastic, which is used in the installation of reverse osmosis filtration, and has a rotating cap that can be removed and replaced...

8.00€ Ex Tax: 8.00€
84-2-20

84-2-20

The material is plastic, 4 points to 2 points straight-through, used to connect the water purifier water inlet, straight-through is used in places with high water pressure, usually in the basement or 1st floor, specifications: 4 to 2 points interface...

1.50€ Ex Tax: 1.50€
Showing 1 to 12 of 32 (3 Pages)